Invertek ODE-2-24050-3HA42
Optidrive E2 Volts / Hertz Control
5.0 HP, 440 Volts AC, 3 Phase In, 3 Phase Out, IP20 (Nema1)
Brake Transistor * = EMC Filter Optional
Optidrive E2 Volts / Hertz Control
5.0 HP, 440 Volts AC, 3 Phase In, 3 Phase Out, IP20 (Nema1)
Brake Transistor * = EMC Filter Optional
Optidrive E2
AC Volts / Hz Variable Frequency Drive
5.0 Horsepower
Input: 380-480 Volts Three Phase, 12.4 Amps Nominal
Output: 380-480 Volts Three Phase, 9.5 Amps Nominal
Brake Transistor Fitted
IP20 (Nema 1)
Frame Size 2 - 8.7 in x 4.1 in x 5.9 in ( L x W x D ), 5.73 Lbs
Optional:
Internal EMC Filter
General purpose economy drive with modbus communication
Rich in features the Optidrive E2 is the most commercially competitive Optidrive in the Optidrive family.
Innovative and compact the Optidrive E2 range combines good looks with robustness, reliability and easy to use performance.
The product is dedicated to low power applications where total costs are ultra-competitive, including:
Optidrive E2 has only 14 standard parameters to adjust in its basic form, thus Optidrive's legendary ease of use could not be easier or quicker to get started with. Optidrive E2 can be supplied with or without an internal rfi filter.
Output ratings | Overload Capacity | 150% for 60 secs 175% for 2 secs |
Frequency | 0…500Hz | |
Input Ratings | Frequency | 48 - 62Hz |
Voltage | 380 - 480 + / - 10% 3 Phase | |
Ambient Conditions | Temperature | Operating : 0 to 50°C Max; Storage : -40 to +60°C |
Altitude | 0 - 2000m, derate 1% per 100m above 1000m | |
Ingress Protection | IP20 (Nema 1) | |
Programming | Keypad | Yes |
PC | Yes | |
PDA | Yes | |
Smartphone | Yes | |
Control Specification | Control Method | Voltage Vector |
PWM Frequency | 4…32kHz (effective) | |
V/Hz ratio | Linear | |
Boost | Yes | |
Stop Mode | Coast / Ramp / DC Brake | |
Internal Brake transistor | Yes. External Resistor required | |
Capacity | 100% Drive Rated Power continuously | |
Skip Frequency | One point, adjustable frequency band | |
Frequency setpoint control | 0…10 VDC 20…4mA 4…20mA 0..20mA Digital - Keypad Modbus |
|
Pre-set speeds | 4 | |
PI Control | Yes | |
Spin Start | Yes | |
Acceleration | 0..600 sec | |
Deceleration | (2 ramps) 0..600 sec | |
Programmable I/O | Input 1 | Programmable Digital Input |
Input 2 | Programmable Digital Input | |
Input 3 | User Selectable Analog / Digital Input | |
Input 4 | User Selectable Analog / Digital Input | |
Output 1 | Programmable Analog / Digital Output | |
Relay 1 | Relay Output (30 VDC 5A, 250 VAC, 6A) | |
Keypad Display | Operating Display | Output Frequency, Current, RPM, Power and User Scalable values |
Remote mount | Optional Optiport E2 remote mounting keypad | |
Protective Functions | Inverter Trip | Over voltage Over current Under voltage External trip Motor overload Over temperature Short circuited Earth Fault Under Voltage |
Memory | Last 4 Trips stored | |
Bus communication | Modbus RTU | Standard |
Profibus DP | via Gateway | |
DeviceNet | via Gateway | |
RS485 (Optibus) | Standard | |
Compliance with Standards | EN 61800-3:2004 | Adjustable speed electrical power drive systems. EMC requirements |