AMK L.I.S.A. CoolFlow SmartPower Control Panel

Large Integrated Supply and Axes Control

20 kW High Voltage DC Power Supply in a Type-12 Enclosure with an integrated Air-Cooled Heat Sink.

External connection to AMK ihXT Smartdrives possible through the E1210 Hybrid Board 

High voltage DC and Ethercat connections are available

Integrated KW VFD option to drive a local motor directly

Allows you the felixibilty to run external iDT5 SmartMotors off of the High Voltage DC Bus, or the smaller ihXT SmartDrives off of the Hybrid Cable.

You can add as many motors as the 20 kW will supply

KE compact power supply module

The KE compact power supply modules generate the DC link voltage for the connected inverters

The compact power supply units are connected to the mains supply and charge the DC bus capacitors.

The compact power supply provides the DC bus for supplying power in dynamic operation to the HCIB or a compact inverter

KW compact inverter module

The KW compact inverter modules generate the AC of varying frequency and voltage to run a servo motor

The integrated encoder system in the servo motor supplies the position value to the colntroller card in real-time.

The controller card adjusts the position, speed and current of the servo motor based on the operating mode.

A servo motor creates regenerative energy during braking,which is fed backinto the DC DC bus.

Excess generative energy within the DC bus is fed back by the compact power supply into the public mains



AMK Hybrid Cable Interface Board

The HCIB Hybrid Cable Interface Board is the interface between the central control cabinet system and the decentralized drives.

The HCIB supplies the DC bus, the 24 VDC supply voltage, the STO signals, and the real-time Ethernet connection to a hybrid cable
The Hybrid cable connects to the ihX inverters and servo motors in series

Cables are available here! 







AMK KES 20 Specifications



AMK KW* Specifications