Invertek ODE-3-440460-3F42
Optidrive E3 Vector or Volts / Hertz Control
30 HP, 440 Volts AC, 3 Phase In, 3 Phase Out, IP20 (Nema1)
Brake Transistor EMC Filter
Categories
Cart
product
(empty)
Optidrive E3
AC Volts / Hz Variable Frequency Drive
30 Horsepower
Input: 380-480 Volts Three Phase, 51.9 Amps Nominal
Output: 380-480 Volts Three Phase, 46 Amps Nominal
Recommended Fuse / MCB Size (B-curve): Non-UL - 63 Amps UL - 70 Amps
Brake Transistor Fitted, Recommended Brake Resistance: 22 Ohms
IP20 (Nema 1)
Frame Size 4 - 16.54 in x 6.73 in x 8.35 in ( L x W x D ), 20.1 Lbs
Internal EMC Filter
Compact, Reliable and Easy to Use
Simply power on and Optidrive E3 is up and running, providing precise motor control and energy savings using the factory settings.
Sensorless Vector Control for all Motor Types
Precise and reliable control for IE2, IE3 & IE4 motors.
- Induction Motors (IM)
- Permanent Magnet Motors (PM)
- Brushless DC Motors (BLDC)
- Synchronous Reluctance Motors (SynRM)
Simple Commissioning
14 parameter basic setup. Default settings suitable for most applications. Contactor style connection for simple wiring.
Intuitive Keypad Control
Precise digital control at the touch of a button.
Application Macros
Switch between Industrial, Pump & Fan modes to optimise Optidrive E3 for your application.
Internal Category C1 EMC Filter
An internal filter in every Optidrive E3 saves cost and time for installation.
Cat C1 according to EN61800-3:2004
Optidrive E3 Features
Innovative technology, reliability, robustness and ease of use in a range of compact IP20 & IP66 enclosures.
Sensorless Vector Control for all Motor Types
Precise and reliable control for IE2, IE3 & IE4 motors.
- Induction Motors (IM)
- Permanent Magnet Motors (PM)
- Brushless DC Motors (BLDC)
- Synchronous Reluctance Motors (SynRM)
Internal Category C1 EMC Filter
An internal filter in every Optidrive E3 saves cost and time for installation.
Cat C1 according to EN61800-3:2004
Application Macros
Switch modes at the touch of a button to
optimise Optidrive E3 for your application
Industrial Mode
Industrial mode optimises Optidrive E3 for load characteristics of typical industrial applications.
Applications include:
- Conveyors
- Mixers
- Treadmills
Pump Mode
Pump mode makes energy efficient pump control easier than ever.
Applications include:
- Dosing Pumps
- Borehole Pumps
- Transfer Pumps
- Swimming Pools
- Spas
- Fountains
Fan Mode
Fan mode (inc. fire operation) makes air handling a breeze, ideal for simple HVAC systems.
Applications include:
- Air Handling Units
- Ventilation Fans
- Circulating Fans
- Air Curtains
- Kitchen Extract
Specifications
| Output ratings | Typical Efficiency | > 98% |
| Overload Capacity | 150% for 60 secs 175% for 2 secs |
|
| Frequency | 0…500Hz, 0.1Hz resolution | |
| Input Ratings | Supply Frequency | 48 - 62Hz |
| Displacement Power Factor | > 0.98 | |
| Phase Imbalance | 3% Maximum allowed | |
| Power Cycles | 120 per hour maximum, evenly spaced | |
|
Ambient Conditions |
Temperature | Storage: -40 to 60°C Operating: -10 to 50°C |
| Altitude | Up to 1000m ASL without derating Up to 2000m maximum UL approved Up to 4000m maximum (non UL) |
|
| Humidity | 95% Max, non condensing | |
| Vibration | Conforms to EN61800-5-1 | |
| Ingress Protection | IP20 (Nema 1) | |
| Programming | Keypad | Built-in keypad as standard Optional remote mountable keypad |
| PC | OptiTools Studio | |
| Display | 7 Segment LED | |
| Control Specification | Control Method | Sensorless Vector Speed Control PM Vector Control BLDC Control Synchronous Reluctance |
| PWM Frequency | 4 – 32kHz Effective | |
| Stopping Mode | Ramp to stop: User Adjustable 0.1 – 600 secs Coast to stop |
|
| Braking | Motor Flux Braking Built-in braking transistor (not frame size 1) |
|
| Skip Frequency | Single point, user adjustable | |
| Frequency setpoint control | 0…10 VDC 0…20mA 4…20mA Motorised Potentiometer (Keypad) Modbus RTU CANopen |
|
| I/O Specification | Power Supply | 24 Volt DC, 100mA, Short Circuit Protected 10 Volt DC, 5mA for Potentiometer |
| 4 Total 2 Digital 2 Analog / Digital Selectable |
4 Total 2 Digital 2 Analog / Digital Selectable |
|
| Digital Inputs | 8 – 30 Volt DC, internal or external supply Response time < 4ms |
|
| Analog Inputs | Resolution: 12 bits Response time: < 4ms Accuracy: ± 2% full scale Parameter adjustable scaling and offset |
|
| Programmable Outputs | 2 Total 1 Analog / Digital 1 Relay |
|
| Relay Outputs | Maximum Voltage: 250 VAC, 30 VDC Switching Current Capacity : 6A AC, 5A DC |
|
| Analog Outputs | 0 to 10 Volt | |
| Application Features | Fire Mode | Bidirectional Selectable Speed Setpoint (Fixed / PI / Analog / Fieldbus) |
| PI Control | Internal PI Controller Standby / Sleep Function |
|
| Maintenance & Diagnostics | Fault Memory | Last 4 Trips stored with time stamp |
| Data Logging | Logging of data prior to trip for diagnostic purposes: Output Current Drive Temperature DC Bus Voltage |
|
| Bus communication | Modbus RTU | 9.6–115.2 kbps selectable |
| CANOpen | 125–1000 kbps | |
| Compliance with Standards | Low Voltage Directive | Adjustable speed electrical power drive systems. EMC requirements |
| EMC Directive | 2004/108/EC Cat C1 according to EN61800-3:2004 |
|
| Machinery Directive | 2006/42/EC | |
| Conformance | CE, UL, RCM |
- Motor Power: 30 Horsepower
- Input Voltage: 380-480 VAC 3 Phase
- Output Voltage: 380-480 VAC 3 Phase
- Control Type: Vector
- IP Rating: IP20
- Electro-Magnetic Shield: EMC Filter Fitted
- Braking Transistor: Internal Transistor
- Disconnect Switch: No Disconnect Switch
- UL Approval: Yes
- Minimum Fuse Size 63 Amps
- Output Amperage: 46 Amps
- Input Amperage 51.9 Amps