Categories

Cart  

No products

Shipping $0.00
Total $0.00

Check out

Home>VFDs - Invertek>Invertek Optidrive P2>Invertek ODP-2-22020-1HF42

Invertek ODP-2-22020-1HF42

Invertek ODP-2-22020-1HF42

Optidrive P2            Sensorless Vector Control                                                             

2.0 HP,   220 Volt AC,   1 Phase In,   3 Phase Out,   IP20 (Nema1)                                         

EMC Filter  &  Brake Transistor 

More details

Invertek ODP-2-22020-1HF42


$464.00

ODP-2-22020-1HF42-SN

Availability: Please call for availability, 1-800-966-2585


Notify me when available

Optidrive P2

 

AC Vector Variable Frequency Drive

2.0 Horsepower

Input: 200-240 Volt Single Phase, 16.2 Amps Nominal

Output: 200-240 Volt Three Phase, 7 Amps Nominal

Internal EMC Filter

Brake Transistor Fitted

IP20 (Nema 1)

Frame Size 2 - 8.7 in x 4.4 in x 7.3 in ( L x W x D ), 3.97 Lbs

 

 

 

World Leading Motor Control


The all new Optidrive P2 provides world leading control for both standard induction motors and permanent magnet motors.

Open loop vector control of standard induction motors provides up to 200% torque from zero speed

Open and closed loop control of the latest generation of high efficiency PM motors

Closed loop encoder feedback capability for standard induction motors

Extensive I/O and communications interface capabilities ensure the drive can be integrated quickly and efficiently into a wide variety of control systems.

A simple parameter structure and carefully selected factory settings ensure fast and easy commissioning.



 

Key Benefits
  • Safe Torque Off meets
    • IEC 61508 SIL 2
    • IEC 61800-5-2 Type 2
    • IEC 62061 SIL 2
    • ISO 13849 PL "e"
  • Pluggable control terminals
  • Internal RFI filter for compliance with the latest EMC standards
  • Just 14 basic parameters allows fast commissioning of powerful features
  • Up to 32kHz Output Switching Frequency for ultra quiet motor operation




Specifications

Input Ratings

Supply Voltage

230V: 200 – 240V ± 10%
 

Supply Frequency

48 – 62Hz
 

Phase Imbalance

3% maximum
 

Inrush Current

< rated current
 

Power Cycles

120/hour max, evenly spaced

Output Ratings

Output Power

230V 1 Phase Input: 0.75 – 2.2kW
 

Overload Capacity

150% for 60 seconds, 200% for 2 seconds
 

Output Frequency

Up to 500Hz

Ambient Conditions

Temperature

Storage:
40 to 60°C
IP20 Operating:
10 to 50°C at default switching frequency
(60°C max possible with derating)
 

Altitude

1000m with no derating
(derate 1%/100m above 1000m)
2000m max UL Approved
4000m max without UL Approval
 

Humidity

95% max, non-condensing

Enclosure

Ingress protection

IP20 standard

Programming

Keypad

Yes
 

PC

Yes
 

Preset speeds

8 user adjustable
 

PID control

Internal
 

Spin start

Yes
 

Acceleration

0 – 3000 secs, 0.1 resolution
 

Deceleration

1st Ramp: 0 – 3000 secs, 0.1 resolution
2nd Ramp: 0 – 30 secs, 0.1 resolution

Performance

Speed regulation

Open Loop: ± 20% of motor slip
Open Loop Vector:
Better than ± 0.5% of motor speed
Closed Loop Vector:
Better than ± 0.1% of motor speed
 

Torque control

0 – 200% of motor rated torque

Control Specification

Control method

V/F Voltage Vector
Energy Optimiser V/F
Permanent Magnet Encoderless
Sensorless Vector Speed Control
Sensorless Vector Torque Control
Closed Loop (encoder) Vector Speed
Closed Loop (encoder) Vector Torque
Closed Loop PM
 

Stopping mode

Coast Stop
Ramp to Stop
DC Injection
Dynamic Braking with external resistor
 

Skip frequency

Single point, user adjustable
 

Setpoint control
(internal)

0 – 10V
10 – 10V
0 – 20mA
20 – 0mA
4 – 20mA
20 – 4mA
Master/Slave (Optibus)
Modbus RTU
CANbus
 

Setpoint control
(optional)

PROFIBUS
DeviceNet
EtherNet

I/O Specification

Digital inputs

10 – 30V DC, internal or external supply, NPN
Response time < 4ms
 

Power supply

24V DC, 100mA, Short Circuit protected
10V DC, 10mA for Potentiometer
 

Analog inputs

;10 – 10V DC
0/4 – 20mA
0/24V, 30V DC max
Resolution: 12 bits + sign
Response time < 4ms
Accuracy: Better than 1% of full scale
Parameter adjustable Scaling and Offset
 

Analog outputs

0 – 10V
0/4 – 20mA
 

Relay outputs

Maximum Voltage : 250V AC, 30V DC
Switching Current : 6A AC, 5A DC



  • Motor Power: 2.0 Horsepower
  • Input Voltage: 200-240 VAC 1 Phase
  • Output Voltage: 200-240 VAC 3 Phase
  • Control Type: Vector
  • IP Rating: IP20
  • Electro-Magnetic Shield: EMC Filter Fitted
  • Braking Transistor: Internal Transistor
  • Disconnect Switch: No Disconnect Switch
  • UL Approval: Yes
  • Input Amperage 16.2 Amps